Bomba de calor HeatPro, 140,000 BTU, 230 V, solo calor

Hayward

SKU: HP21404T

Las bombas de calor HeatPro de alto rendimiento con ahorro de energía mantienen la temperatura ideal del agua de forma económica y silenciosa, en todo momento.

SKU de repuesto: HP21405T

Descuentos locales
Up to {totalAmount} in {altRebateConsumerType} rebates near {cityState}.
Descuentos locales
{offerCount} {altRebateConsumerType} rebate{s} near {cityState}.

Características

HeatPro cuenta con la lámina del vaporizador “Ultra Gold”, única en la industria, resistente a la corrosión y que ofrece extrema durabilidad, especialmente en la costa. Su diseño compacto permite facilita la instalación y el servicio en piscinas nuevas y existentes.

Características y beneficios

  • Termocambiador de titanio - Excelente resistencia al agua salada y a la corrosión química
  • Bobina de vaporizador "ultradorada" exclusiva resistente a la corrosión especialmente en áreas costeras
  • Funcionamiento silencioso - Ambiente de patio silencioso
  • Funcionamiento certificado por AHRI: el funcionamiento certificado por un laboratorio independiente garantiza el valor de la compra
  • Conexiones de tuberías de unión CPVC de 2 in x 2 1/2 in: unión común para la instalación o el servicio, se adapta a tuberías más grandes; recomendado para mayor eficacia
  • Peso liviano (menos de 250 lb)
  • Los productos EXPERT LINE solo pueden comprarse a través de tu profesional de piscinas o tienda local.  Se pueden aplicar exclusiones y otros términos y condiciones.
  • Garantías de piezas y mano de obra de más de 3 años*

* Cuando lo vende un socio Hayward Rewards®. Se pueden aplicar exclusiones y otros términos y condiciones.

Descongelamiento activo No
Aplicación Construcción nueva, renovación, mercado de posventa
Modo Boost No
Marca Hayward
Canal Línea Expert
Velocidad del compresor Una velocidad
Capacidad de enfriamiento No
Tipo de motor de ventilador PSC
GTIN 610377124836
Capacidad de calefacción (BTU/h) 140,000
Hercios, calentadores 60 Hz
Kilovatios 41 kW
Warranty - Labor 2 años
Funcionamiento a temperaturas ambiente bajas No
Cantidad de caja a granel 1
Maximum Breaker Size (Amps) 70
Temperatura mínima de operación 50 °F
Cantidad por palé 1
Warranty - Parts 5 años
Phase - Heaters 1
Plataforma Cuadrada
Tipo de piscina Elevada, enterrada
Dimensiones del producto 44 in x 30.25 in x 34 in
Altura del producto 44 in
Longitud del producto 34 in
Peso del producto 280 lb
Ancho del producto 30.25 in
Espacio libre posterior - Calentadores 12 in
Refrigerante
Series de productos de calentadores HeatPro
Dimensiones del envío 50 in x 31.5 in x 40 in
Pesos de envíos 327 lb
Espacio libre lateral - Calentadores 12 in
Modo silencioso No
Espacio libre vertical - Calentadores 72 in
Voltaje - Calentadores 230 V
Caudal máximo de agua 75
Caudal mínimo de agua 30

Questions & Answers

15 answered question(s)

06/24/26

Q: I recently installed the Heat Pro 140k so this is my first season operating the heat pump. I understand that the heat pump shouldn’t be allowed to sit idle with no circulation for extended periods of time but in the current summer conditions with the heat pump not being called on to operate because outside conditions are warm enough to keep the pool water temperature above set point is it ok to let water circulate through the heat pump for maybe weeks at a time while the heat pump is not being called on to run? Or, should I bypass the heat pump and drain until needed again in the fall? Hope this makes sense.

A:
Hi, your heat pump is designed to have water circulating through it any time the pool pump is running. No need to bypass it when not in use.

By Hayward Support

06/24/26

Q: ,unexpected frozen pipe . need a new heat exchanger. The warranty cover??

A:
No. Freeze damage is not covered by warranty.

By Hayward Support

06/24/26

Q: Can this pump be used on a 15x30 above ground salt water pool (48 inch water depth)? I know this model is discontinued, but someone is looking to give this heater to us and wondering if it's compatible with our pool. I also know this model might be excessive for our pool size, but just wondering if compatible. Thank you!

A:
Hi, if your pump/filter system is capable of pushing a minimum of 40 gpm water through the heat pump, and you have a dedicated 50 amp 240 volt circuit available for the heat pump it will work for your pool. You may need to have a service company come...

By Hayward Support

06/24/26

Q: How can we submit a warranty?Without using our installer. Hayward HP21404T Serial # 21132110509567001 Work started 2024 Contract signed 4/15/2023

A:
Hi, for help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

By Hayward Support

06/24/26

Q: What is warranty

A:
HI, this heat pump (HP21404T) is discontinued. It has been replaced by the HP21405T and will have 3 years parts, and 1 year labor if purchased from an authorized Hayward Dealer. You can find a list of them by clicking on the Dealer Locator tab on the...

By Hayward Support

06/24/26

Q: Can this be connected to WiFi remote control

A:
HI, this does not have a direct wifi connection.

By Hayward Support

06/24/26

Q: The unit has a molded “plastic” drain pan underneath it. Any problems with running a 1” drain line from the pan to get condensate away from the unit, pad, and foot traffic?

A:
Hi, you would have to set the heat pump in some sort of drain pan. It has several openings in the base pan for drainage.

By Hayward Support

06/24/26

Q: WHAT IS THE DIFFERENCE BETWEEN W3HP21404T MODEL AND THE AND THE W3HP21405T

A:
Hi, the W3HP21404T is obsolete now, but the major differences are the evaporator coil is now microchannel instead of tube and fin.

By Hayward Support

06/24/26

Q: It doesn’t start

A:
Hi, for help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

By Hayward Support

06/24/26

Q: Hi, Is this model Salt Water resistant?? How many breakers are required to operate this model. Hayward HeatPro Heat Pump, 140,000 BTU HP21404T

A:
Hi, our heat pumps are designed to hold up well in coastal environments, but exposure to salt air will eventually cause corrosion. It requires a single 240 volt 50 amp breaker.

By Hayward Support

06/24/26

Q: I have an HP21404T in my new build pool and spa in Southern California. The heater does a fine job heating the spa, however, even on a 75 degree day the heater will not provide other than minimal heat to the pool ( for example it heats starting at 8 am from 62 degrees to 70 around noon and then just stop sheating). The Hayward rep is stating that we shouldn’t expect the heater to work other than on hot summer days. Feeling this can’t be right. Any ideas if this is in fact fixable?

A:
Hi, someone from our Technical Service Department will contact you via email.

By Hayward Support

06/24/26

Q: Can I leave a HP21404T heater on if the pool pump is not running? I know that it will show "FLO" on the display, but will it hurt the heater?

A:
Hi, yes you can! The heat pump will not operate unless the pump is running, so no harm will come to it if you leave it on.

By Hayward Support

06/24/26

Q: What is the maximum breaker I can put on this heat pump what is its fla?

A:
Hi, the maximum breaker is a 70 amp 240 volt. We recommend a 50 amp 240 volt for the best overcurrent protection.

By Hayward Support

06/24/26

Q: Is this electric

A:
Yes it is. It requires a 50 amp 240 volt dedicated circuit.

By Hayward Support

06/24/26

Q: What's the factory refrigerant charge?

A:
It should be 5 lbs 14 oz, but always check the data plate on the heat pump to be sure.

By Hayward Support

Powered by Translations.com GlobalLink Web Software