Filtro de sílex ProSeries 22 in, montaje superior (válvula VariFlo de 1 1⁄2 in incluida)

Q: hayward S 220 T sand filter. This time start to pump dirt from vacuuming back to pool thru jets.

Q: I asked a question yesterday about a lateral replace with pipe for a 22” pro series sand filter. Your answer was SX244DAS but from my research it says that is for a 24”. Mine is a 22”. Just double checking the part number. Does the 244 fit the 22”?

Q: I have a Hayward 22” pro series sand filter W3S220T for my in ground pool. I have a cracked lateral and need replacement parts. What are the measurements on the laterals and the sand pipe for this product?

Q: Hi I have an S220t filter. I had the sand replaced. Trying to figure out if they under filled or over filled with sand. Does filter have a fill line? What level should sand be at? How many inches from top? Etc.. thank you

Q: My tank developed a small hole near the neck. I would like to buy just the tank.

Q: I have an S220T that is having issues with air in the system. All the piping is new and airtight. Is there a pressure relief valve that can be added. This issue makes vacuuming impossible.

Q: Hi I am looking to replace my Hayward sand filter and trying to decide the s220t and the w3s220t. What is the biggest difference between the 2

Q: Good Morning. We have the S220T sand filter and would like to replace the valve. On our valve it says SP714-A but all I see is the SP714-T? If I order the T will I be OK? We also want to replace the cap and gasket at the bottom of the filter. My cap says S180LA. Are they interchangable?

Q: Hi. I currently have the s210t that I need to replace. My pool is a little over 24000 gal. I use a 1.5 horse pump and was wondering if it would match up with the s220t and if that would be a better setup for my pool. Also, I would like to use the activated glass in the filter in lieu of sand...thoughts?

Q: I have the s220t. Is the w35s220t a replacement for it

Q: Is the S220T sand filter still available? If not, is there a replacement?

Q: Do I load the 25# pea gravel, then the diffuser, then the glass filter media, then top off with water?

Q: Pressure Guage

Q: Any concerns to use grade 20/40 sand instead of grade 20 ? For an s244t

Q: What should the pressure gauge be reading when pumping from a super pump 1hp motor? I am seeing 2-4 and the bubble on the 7 way value is not moving water and is half way filled when in the filter position?